CNC Lathe & Milling Machine Manufacturer · Foshan, China · Since 1989
We Pour Our Own Castings
CNC lathes, CNC milling machines and conventional lathes — 23 models, machined from beds we cast ourselves, shipped to 26+ countries.
Four Categories. Twenty-Three Models.
Every machine below is cast, fabricated and machined at our own plant in Nanhai District, Foshan.
The Numbers, Before You Ask
One model from each category. Full parameter sheets for all 23 machines are on the machine range page.
| Model | Capacity | Travel / Length | Spindle | Control |
|---|---|---|---|---|
| CK6166DH-1000CNC Lathe | Ø660 mm swing over bed | 1,000 mm between centres | Ø105 mm bore · A2-11 | On request |
| XKM40BCNC Mill | 1,570 × 320 mm table | X 1,000 · Y 450 · Z 400 mm | BT40 · 8,000 r/min | GSK 980MDi |
| M5Turret Mill | 1,370 × 305 mm table | X 800 · Y 440 · Z 480 mm | NT40 · 5 HP | Manual / power feed |
| C6132AConventional | Ø350 mm swing over bed | 750 / 1,000 / 1,500 mm | Ø46 mm bore | Manual |
What Our Customers Machine
Start from the part you have to produce, not the model number. See all applications →
Auto & Motorcycle Parts
Hubs, shafts, brake components, gear blanks — repeat batches on CNC lathes.
Valves & Fittings
Bodies, bonnets, threaded couplings. Bar work through Ø105 mm spindle bore.
Hydraulic & Pneumatic
Cylinder bodies, pistons, manifolds — turning and milling on one floor.
Mould & Die Shops
Electrode machining, plate work and slot milling on XKM bed-type mills.
General Job Shops
Mixed low-volume work where a turret mill and a manual lathe still earn their keep.
Machine Tool Dealers
OEM and private-label builds, shipped in container loads with export packing.
Most Brands Assemble.
We Manufacture.
Parts Come From the Same Floor as the Machine
Because we cast and machine in-house, spare parts do not depend on a third-party supply chain. Full service terms →
Represent JXJ in Your Market
Territory agreements, dealer pricing and demo units. Currently expanding in Latin America, Southeast Asia and the Middle East.
Become a Distributor →CE-Tested Milling Machines.
Scope Listed Model by Model.
Machine safety independently assessed by Beide (Shenzhen) Product Service Ltd., November 2024. Reports and scope →
Machinery Safety
EN ISO 12100:2010
EN ISO 16090-1:2022
Electrical Safety
EN 60204-1:2018
Electrical equipment of machines
Not Yet Covered
CNC lathes (CK), CNC mills (XKM)
and conventional lathes (C series)
Tell us at enquiry stage if the destination is the EU